Plasma Cutting Products

In 1968, Hypertherm founder Dick Couch and colleague Bob Dean discovered a way to create a narrower plasma arc, capable of cutting metal more quickly and more accurately than ever before. Fifty years later, the founding principle of customer-focused innovation continues to drive product development at Hypertherm. And that spirit of innovation is one of the reasons why Hypertherm’s plasma, laser, and waterjet systems, software, motion controls and consumables consistently outperform the competition in cut quality, productivity, and cost-efficiency.
ITWS has been associated with Hypertherm for past many years for KSA and has been officially appointed as distributor for UAE since 2017. ITWS deals in the complete product range of Hypertherm but primarily focusing on selling the Power Max series and the consumables for Powermax and HPR machines and torches.

Products

Input voltages 120-240 V, 1-PH, 50/60 Hz
Input current @ 2.5 kW 120-240 V, 1-PH, 29-15 A
Output current 15-30 A
Rated output voltage 83 VDC
Duty cycle @ 40°C (104°F) 35%, 240 V
20%, 120 V
Open circuit voltage (OCV) 256 VDC
Dimensions with handles 420 mm (16.5″) D; 195 mm (7.7″) W; 333 mm (13.1″) H
Weight w/ 4,5 m (15′) torch 13.5 kg (29.8 lbs)
Input power cable length 3 m (10′)
Power supply type Inverter – IGBT
Engine drive requirement 5.5 kW for full 30 A output
Certifications CSA-certified for use in the Americas and Asia, except China CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
Warranty Power supplies have a 3-year warranty and torches a 1-year warranty.
Input voltages(± 10%) CSA 200 – 240 V, 1-PH, 50-60 Hz
480 V, 3-PH, 50-60 Hz1
CE/CCC 230 V, 1-PH, 50-60 Hz
400 V, 3-PH, 50-60 Hz
Input current
@ 6.5 kW
CSA 200 – 240 V, 1-PH, 39/32 A
480 V, 3-PH, 9.4 A1
CE/CCC 230 V, 1-PH, 33 A
400 V, 3-PH, 10 A
Output current 10–45 A
Rated output voltage 145 VDC
Duty cycle@ 40° C (104° F) CSA 50% @ 45 A, 200 – 240 V, 1-PH
60% @ 41 A, 200 – 240 V, 1-PH
100% @ 32 A, 200 – 240 V, 1-PH
50% @ 45 A, 480 V, 3-PH
60% @ 41 A, 480 V, 3-PH
100% @ 32 A, 480 V, 3-PH
CE/CCC 50% @ 45 A, 230 V, 1-PH
60% @ 41 A, 230 V, 1-PH
100% @ 32 A, 230 V, 1-PH
50% @ 45 A, 400 V, 3-PH
60% @ 41 A, 400 V, 3-PH
100% @ 32 A, 400 V, 3-PH
Open circuit voltage (OCV) 275 VDC (200 – 240 V, CSA/CE/CCC and 480 V, CSA)
265 VDC (400 V CE/CCC)
Dimensions with handles 442 mm (17.4″) D; 173 mm (6.8″) W; 357 mm (14.1″) H
Weight with 6.1 m (20′) torch CSA 14 kg (31 lbs.)
CE/CCC 15 kg (33 lbs.)
Gas Supply Cutting: air (clean, dry and oil-free), nitrogen, F5
Gouging: air (clean, dry and oil-free), nitrogen, F5
Marking: air (clean dry and oil-free) argon
Power supply type Inverter – IGBT
Recommended
gas inlet
flow rate / pressure
188 I/min (400 scfh) @ 5,9 bar (90 psi)
Input power cable length 3 m (10′)
Power supply type Inverter – IGBT
Engine drive requirement 12.5 kVA (10 kW) for full 45 A output
Electrical efficiency 88%
Recyclability 100%
Certifications CSA certified for use in the Americas and Asia, except China. CCC for use in China. CE, RCM, GOST-TR, UkrSEPRO, and Serbian AAA for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
Warranty Power supply: 3-year
Input voltages CSA 200 – 480 V, 1-PH, 50/60 Hz
200 – 600 V, 3-PH, 50/60 Hz
CE 380/400 V, 3-PH, 50/60 Hz
Input Current @ 9 kW CSA 200/208/240/480/600 V, 3-PH, 32/31/27/13/13 A
200/208/240/480 V, 1-PH, 52/50/44/22 A
CE 380/400 V, 3-PH, 15.5/15 A
Output current 20 – 65 A
Rated output voltage 139 VDC
Duty cycle @ 40°C (104°F) CSA 50% @ 65 A, 230 – 600 V, 1/3-PH
40% @ 65 A, 200 – 208 V, 1/3-PH
100% @ 46 A, 230 – 600 V, 1/3-PH
CE 50% @ 65 A, 380/400 V, 3-PH
100% @ 46 A, 380/400 V, 3-PH
Open circuit voltage (OCV) CSA 295 VDC
CE 270 VDC
Dimensions with handles 500 mm (19.7″) D; 234 mm (9.2″) W
455 mm (17.9″) H
Weight with 6.1 m (20′) torch CSA 29 kg (64 lbs)
CE/CCC 26 kg (57 lbs)
Gas Supply Cutting: air (clean, dry and oil-free), nitrogen, F5
Gouging: air (clean, dry and oil-free), nitrogen, F5
Marking: air (clean dry and oil-free) argon
Power supply type Clean, dry, oil-free air or nitrogen
flow rate / pressure Gouging: 450 scfh; 212 l/min (7.5 scfm) @ 70 psi (4.8 bar)
Recommended gas inlet Cutting: 189 l/min (400 scfh; 6.7 scfm) @ 85 psi (5.9 bar)
Input power cable length 3 m (10′)
Power supply type Inverter – IGBT
Input voltages CSA 200 – 480 V, 1-PH, 50/60 Hz
200 – 600 V, 3-PH, 50/60 Hz
CE 380/400 V, 3-PH, 50/60 Hz
Input Current @12.2 kW CSA 200/208/240/480 V, 1-PH, 70/68/58/29 A
200/208/240/480/600 V, 3-PH, 42/40/35/18/17 A
CE 380/400 V, 3-PH, 20.5/19.5 A
Output current 25 – 85 A
Rated output voltage 143 VDC
Duty cycle @ 40°C (104°F) CSA 60% @ 85 A, 230 – 600 V, 3-PH
60% @ 85 A, 480 V, 1-PH
50% @ 85 A, 240 V, 1-PH
50% @ 85 A, 200 – 208 V, 3-PH
40% @ 85 A, 200 – 208 V, 1-PH
100% @ 66 A, 230 – 600 V, 1/3-PH
CE 60% @ 85 A, 380/400 V, 3-PH
100% @ 66 A, 380/400 V, 3-PH
Open circuit voltage (OCV) CSA 305 VDC
CE 270 VDC
Dimensions with handles 500 mm (19.7″) D; 234 mm (9.2″) W; 455 mm (17.9″) H
Weight with 7.6 m ( 25′) torch CSA 32 kg (71 lbs)
CE 28 kg (62 lbs)
Gas Supply Clean, dry, oil-free air or nitrogen
Recommended gas inlet Cutting: 189 l/min (400 scfh, 6.7 scfm) @ 5.9 bar (85 psi)
flow rate / pressure Gouging: 212 l/min (450 scfh, 7.5 scfm) @ 4.8 bar (70 psi)
Input power cable length 3 m (10′)
Power supply type Inverter – IGBT
Input voltages CSA 200-600 V, 3-PH, 50/60 Hz
CE 400 V, 3-PH, 50/60 Hz
200-400 V, 3-PH, 50/60 Hz
CCC 380 V, 3-PH, 50/60 Hz
Input current @ 16.8 kW 200/208/240/380/400/480/600 V, 58/56/49/28/25/22 A
Output current 30 – 105 A
Rated output voltage 160 VDC
Duty cycle @ 40°C (104°F) 80% @ 105 A
Open circuit voltage (OCV) 200-600 V CSA: 300 VDC
380 V CCC and 230-400 V CE: 288 VDC
400 V CE: 292 VDC
Dimensions with handles 592 mm D; 274 mm W; 508 mm H (23.3″ D; 10.8″ W; 20.0″ H)
Weight with 7.6 m (25′) torch 200-600 V CSA: 45 kg (100 lbs)
380 V CCC/400 V CE: 41 kg (90.4 lbs)
230-400 V CE: 45 kg (100 lbs)
Gas Supply Clean, dry, oil-free air or nitrogen
Power supply type Inverter – IGBT
Recommended gas inlet Cutting: 217 l/min (460 scfh) @5.9 bar (85 psi)
flow rate / pressure Gouging: 227 l/min (480 scfh) @4.8 bar (70 psi)
Input power cable length 3 m (10′) *
Power supply type Inverter – IGBT
Engine drive requirement 30 kW for full 105 A output
Certifications CSA-certified for use in the Americas and Asia, except China.
CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
CCC for use in China.
Warranty Power supplies have a 3-year warranty and torches a 1-year warranty.
Input voltages CSA 480/600 V, 3-PH, 50/60 Hz
CE 400 V, 3-PH, 50/60 Hz
CCC 380 V, 3-PH, 50/60 Hz
Input current @ 21.9 kW 300/400/480/600 V, 38/36/31/24 A
Output current 30 – 125 A
Rated output voltage 175 VDC
Duty cycle @ 40°C (104°F) 100% @ 125 A
Open circuit voltage (OCV) 400/600 CSA: 320 VDC
380 V CCC: 290 VDC
400 V CE: 305 VDC
Dimensions with handles 592 mm D; 274 mm W; 508 mm H (23.3″ D; 10.8″ W; 20.0″ H)
Weight with 7.6 m (25′) torch 480 V, 47,9 kg (105.7 lbs)
600 V, 47,5 kg (104.7 lbs)
380 V, 45,2 kg (99.6 lbs)
400 V, 48,9 kg (107.8 lbs)
Gas Supply Clean, dry, oil-free air or nitrogen
Recommended gas inlet Cutting: 260 l/min (550 scfh) @5.9 bar (85 psi)
flow rate / pressure Gouging: 212 l/min (450 scfh) @4.1 bar (60 psi)
Input power cable length 3 m (10′) *
Power supply type Inverter – IGBT
Engine drive requirement 40 kW for full 125 A output
Certifications CSA-certified for use in the Americas and Asia, except China.
CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
CCC for use in China.
Warranty Power supplies have a 3-year warranty and torches a 1-year warranty.

Duramax™ torches can give enhanced performance and productivity. Handheld and machine styles available. SpringStart™ electrode technology eliminates moving parts in the torch for more reliable arc-starting

Complete range of plasma consumables for Paowermax and HPR is available. These consumables & Spares are being imported from Hypertherm Factory in USA Or Netherlands and comes in the original Hypertherm Packing.

Download Available

1. Powermax® family brochure

For Product base solutions, to know & try the products in our offerings, to call for Technical discussions with our Sales & Product Engineers.